Features

• High performance DiscSystem clutches.
• Clamp loads chosen carefully to avoid clutch hydraulic and crankshaft thrust bearing problems.
• Release bearing contact area of diaphragm springs hardened to reduce wear.
• Kits include clutch disc, pressure plate, release bearing, alignment tool, and pilot bearing/bushing (where applicable).

Styles

• Street Sport - Street Sport kits are designed as a stock performance upgrade for those who have stock or basic bolt on air intakes and cat back exhausts. These kits include an organic disc ,with a sprung hub, matched to a heavy-duty pressure plate and depending on the car a release and pilot bearing. We use a 100% pure Kevlar material in our design since Kevlar blends do not work well. Our Kevlar units can handle a 15% increase over the vehicles stock torque rating. Windowed Kevlar can hold slightly higher loads.
• Street Mod - Street Mod kits are designed for those who have or are adding onto the basic bolt-ons with headers and downpipes. These kits include a segmented Kevlar disc, with a sprung or solid hub, matched to a heavy-duty pressure plate. We use a 100% pure Kevlar material in our design since Kevlar blends do not work. Our Kevlar units can handle a 30% increase over the stock clutches rating.
• Sport Pro - Sport Pro kits are for those who have upgraded past the basic bolt ons. Adding a turbo and supercharger to a normally aspirated car. Chips, tuning larger than stock turbos & nitrous. These 4, 6 & 8 puck Ceramic kits use a specially blended ceramic puck with either a sprung or solid hub. Our 8 puck kits also have a marcelled drive plate which helps improve driveability over a standard button style clutch. The disc is matched heavy duty pressure plate, release, pilot bearing and alignment tool. These unique pucks translate into a completely STREETABLE disc manners while offering lots of holding power.
• Race Pro - Race Pro kits are recommended for those who are in need of a streetable clutch with the holding power of a race clutch. These 4 and 6 puck Feramic kits use an aggressive but STREETABLE puck with either a sprung or solid hub. The disc is matched heavy duty pressure plate, release and pilot bearing. These Feramic pucks go way beyond the holding capacity of our ceramic pucks but have great durability. The high holding capacity of this clutch exceeds the ratings of some multi-disc clutches!

 

 

No reviews yet

Returns; Defective and Damaged Merchandise

Defective and freight damaged merchandise (but only where RX7DRIVER.COM is providing shipment) may be returned to RX7DRIVER.COM for full credit, but only upon verification by RX7DRIVER.COM of such defect or damage. A Returned Merchandise Authorization ("RMA") form must be filled out by the Buyer and Approved by RX7DRIVER.COM. Credit will be issued to Buyer upon receipt of the RMA form and the claim approval from the freight company.

Returns; Exchanges; Good Merchandise

Returns of good merchandise may be accepted by RX7DRIVER.COM in its sole discretion under the following conditions:

Return/Exchange of merchandise in totally re-saleable condition, without markings on the original packaging will be restricted to extraordinary circumstances with prior approval from RX7DRIVER.COM. Accepted return will be assessed a 25% restocking charge. Returned part number shall not exceed 15% of total annual purchase quantities.

Return/Exchange of merchandise in packaging that has been marked, relabeled or otherwise defaced will be restricted to extraordinary circumstances with prior approval from your RX7DRIVER.COM. Accepted return will be assessed a 30% restocking charge, except that RX7DRIVER.COM merchandise returned in packaging that has been marked, relabeled or otherwise defaced will be subject to a 40% restocking charge. Returned part number shall not exceed 15% of total annual purchase quantities.

Merchandise classified by RX7DRIVER.COM as TB (To Be Discontinued), or DC (Discontinued), may not be returned for credit.

Merchandise on sales promotion or inventory packages may not be returned for credit.

Buyer must pay all return transportation charges.

Buyer must obtain and complete an RMA form, issued by RX7DRIVER.COM, for any good merchandise return or exchanges.

Returns/Exchanges will not be accepted under any circumstances after 15 calendar days after the ship date indicated by RX7DRIVER.COM.

Any returns for non-fitment or quality issues will require high quality digital pictures of the products to be emailed to the account manager before an RMA is approved.

Order cancellations will take up to 48 hours after a cancellation is requested before the order is officially cancelled and money processed for return.